CONSELF | CFD Buildings – How to simulate the action of wind on buildings
post-template-default,single,single-post,postid-4233,single-format-standard,ajax_fade,page_not_loaded,,columns-4,qode-child-theme-ver-1.0.0,qode-theme-ver-11.0,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive

CFD Buildings – How to simulate the action of wind on buildings

CFD Buildings – How to simulate the action of wind on buildings

In this webinar we show how to simulate the wind flow over an array of buildings. During the result analysis phase we will show how to obtain useful insights about pressure and velocity distribution inside simulation domain and on buildings walls. It will also be shown how to use these outputs as inputs for structural solvers to evaluate buildings wind loads.

This webinar aims at guiding the user through the correct use of CONSELF simulation platform when dealing with wind flows in urban contexts very useful to investigate pressure and velocity distributions around and over buildings. It shows every step of the analysis, from geometry upload and manipulation to results post processing. Every meshing and CFD parameter setup is explained to assure a very smooth learning curve to non expert users. Next scheduled webinars open for registration can be found on our Events page.

This simulation, the whole cycle, typically requires between 15 and 50 simulations credits. So it can be run even with the WELCOME plan that gives every registered user 20 simulation credits for free every month, forever.

The technology on which the platform is based is the well known OpenFOAM library. For this reason we can guarantee a state of the art tool that provides accurate and reliable results.

With these tutorials and our user manual (here), every professional can now take full advantage of one of the most innovative engineering designing tools.

The session has been recorded and the full length video is available here from our YouTube channel. A complete collection can be found on the dedicated Webinars and Tutorials page.


CONSELF wants to make state of the art, cutting edge technology, available to every professional in the globe.

CFD & FEM simulation software is a very powerful tool, with its adoption optimization and innovation can be achieved in every field. To make this instrument accessible to everyone means lowering costs, but mainly to develop an infrastructure that favours a super-easy adoption by market new entrants.

CONSELF is highly committed and will pursue this goal working side by side with professional and industries to define the best strategies and solutions.

Alessandro Palmas –

No Comments

Post A Comment